Graco InvisiPac GS35 Slim Single Module Applicator Discount

Graco InvisiPac GS35 Slim Applicator Overview

The Graco GS35 slim single module applicator offers a smaller footprint than the traditional GS35 applicator unit. The GS35 slim applicator was designed to eliminate hot melt clogging allowing for higher up time and reducing overall operating costs. 

The Graco GS35 Slim offers was engineered with an air open spring close ball and seat allowing for greater than 3,500 cycles per minute. 

Solenoid

Engineered for optimal control and with high speed and high temperature applications in mind.

Module Spring

The GS35 Slim applicator module comes with a factory set spring that works across all pneumatic and fluid pressure ranges which means there is no need for fine adjustments. 

GS35 Module Filter

This module filter was engineered to protect the ball and seat from char and debris creating a clog free system.

The Manifold

The Manifold on the GS35 Slim applicator traps residual char or debris which is then removed when the filter is changed. The manifold filter is placed in a heated zone which means no cold spots so you have consistent dispensing. 

Finally, the manifold can be brought up to heat in 10 minutes. 

* Both the InvisiPac GS35 and GM100 Plug-Free applicator have 2 different RTD options:
  1)  Pt 100(385) is a Platinum 100 ohm RTD. 
  2) Ni 120 is a Nickel 120 ohm RTD.

The name plate on the applicator will list which one to pick on the delivery system. If you pick an incorrect selection, the applicator may not heat properly or it may be damaged. Remember to specify the type of RTD in use on the Display Module.

Specifications

• Overview: Air Open Spring Close, Ball & Seat
• Speed: Greater than 3,500 cycles per minute
• Time to Temperature: Less than 10 minutes
• Maximum Working Fluid Pressure: 1500 psi 103 bar 10.3 MPa
• Operating Pneumatic Pressure Range: 40-80 psi
• Maximum Operating Temperature: 400 Degrees F
• Ambient Temperature Range: 32-122 Degrees F
• Solenoid Valve: 24 Vac or 110 Vac
• Electrical Service: 200-240 Vac
• Approvals: UL499, CSA88, CE, ISO 9001

• Configurations Options

  • Graco 24U021 | RTD Pt 100 (385) | 24 VDC
  • Graco 24U022 | RTD Pt 100 (385) | 110 VAC
  • Graco 24U023 | RTD Pt 100 (385) | None
  • Graco 24U024 | RTD Ni 120 | 24 VDC
  • Graco 24U025 | RTD Ni 120 | 110 VAC
  • Graco 24U026 | RTD Ni120 | None